Vacuum Bagging Starter Hardware Kit Resin Epoxy:Poly Bag+Gauge Adapter Chuck Set

Description

Vacuum Bagging Start Hardware Kit:Poly Fabric Gauge Brass Connector/Adapter Hose
Vacuum Bagging Starting Hardware Kit: with Deep Vacuum pump Bagging Material, Vacuum Gauge, Vacuum Nipple and Other Hardware for a easy setup for Epoxy and the alike infiltration in Workshops
Vacuum bagging is a great method for building a better composite part. This Starter Kit contains the essential tools and hardware to let you get it started. Including the vacuum source: the pump, and the bagging film. You get your building materials and you are ready to get started.Remember, all of our fittings, components, and our tubing are durable and compatible. They can all be used again, and combined for vacuum bagging components.
View a demo and review by a customer at:
https://www.youtube.com/watch?v=eHyAhXMj8cc
copy the above address and paste it to your browser address bar, to see it, please.
SPECIFICATIONS OF THE PUMP:
POWER SUPPLY: 110 VOLTS
PUMPING RATE: 6.0 CFM
POWER: 1/2 HP
INTAKE PORT: 1/4 inch male SAE, and 3/8 inch Male SAE flare, include an adapter to 1/2 ACME
MAX VACUUM: 25 MICRONS
DIMENSIONS: 305(L) x 132(H) x 240(W)
OIL CAPACITY: 450 ml
WEIGHT: 28 lbs
SPECIFICATIONS OF THE VACUUM GAUGE:
Construction: SS case on a brass frame;
Size: 2.5-inch in diameter, large face;
2.0 inch over all depth
Range: from 0 to -30" Hg or -100 kPa scales in range;
Connection: straight 1/8" NPT male brass, on back center of the gauge body;
5% accuracy on the full scale;
plus a Tee adapter(1/4 X 1/4 X 1/8) to 1/4" SAE Flare port;
SPECIFICATIONS OF THE VACUUM CHUCK(NIPPLE) AND BAG SHEET:
Straight solid brass structure
with 1/2 multi Barbed connector to hose/tubing, no restriction
with 1.6 inch over all height
with matching rubber washer sealer and sealers needed for a tight connection;
with matching large SS washer with bigger contact area to protect the film forming the bag
With a 5 ft 1/2 ID 3/4 OD thick walled vacuum hose
with 1 sheet of plastic bagging material: 6 mil thick stretchable punch resistent 60" X 100"
Sold as one assembly unit
PACKING LIST:
Vacuum Pump with a Bottle of vacuum oil and Power Cord
Vacuum Gauge with a Tee adapter
Vacuum Gauge Chuck with 5 ft 1/2 ID vacuum hose
FEATURES OF THE PUMP
Aluminum alloy casing: Alloy casing has high heat dissipation to keep the motor and pump cool, while being light weight and efficient
Direct drive motor allows for easy start up and is maintenance free
Direct coupling between the motor and pump results in quiet running and good performance
Oil drain valve positioned at bottom of oil reservoir.
With a hand valve built-in at the intake ports: 1/4 flare and 3/8 flare.
Great tool for: AC system evacuation (Refrigeration or Air Conditioning)
Buy it now for only 7.77, or more information available at https://www.viot.us,
Ports:
1/4 & 3/8" SAE male flare, Optional adapter to 1/2"ACME or 5/16"Barbed
Valve in open position.
Built-in isolation valve ( value added)
in closed position.
User manual at: http://www.viot.us/showmanual.php?model=pumps
Pictures sell!
Auctiva offers Free Image Hosting and Editing.
300+
Listing Templates!
Auctiva gets you noticed!
The complete eBay Selling Solution.
Every buyer gets a MyStoreRewards invitation for cash back
Add a map to your own listings. FREE Trial!
Track Page Views With
Auctiva's FREE Counter