Led ladder Controller 32 Channel Automatic LED Stair Lighting Sense Step system

Description

32 Channel LED Controller with PIR Motion Sensor for Control Each Stair Light,Indoor Motion Night light DC12V & 24V Flexible LED Strip for The Stair
Product description:
Product name: 32-channel stair sensor
Voltage: DC12V/DC24V
Power: ≤350w
Channel: 32
Sensors: 2
Controller operation:
1 Long press for 3 seconds to set the number of lights on the stairs, click the button until all lights are on, up to 32 steps, long press again to confirm.
2 The blue light indicates that the serial number light is turned on
3 Touch the button to adjust the speed of turning off the lights on the controller. The higher the four gears, the slower the lights will turn on and turn off.
Installation Tips:
1 When the lamp is plugged into the controller, be sure to find the socket of the corresponding serial number
2 The controller and sensor can be hidden in the electric box
3 Be sure to connect the positive and negative poles, the red is the positive, the blue is the negative, and the low-voltage current is DC12-24V, not AC220V/110V
4 It is recommended to bury the line in advance and install the lights when the stairs are decorated.
5 The wiring needs to be disconnected, and the wiring cannot be plugged in to avoid short circuit
NOTE:
1-A/B sensors need to be installed at the entrance and exit of the stairs and face the human body.
2- The product is low voltage 12V-24V, need to connect transformer. Do not directly connect 220V, it will burn the controller.
3- The product is not waterproof.
Important note: The positive and negative terminals of the power supply input of the controller cannot be reversed, the red wire V+ is connected to the positive electrode of the switching power supply, and the blue (or black wire) V- is connected to the negative electrode of the switching power supply.
Product package:
Only LED controller: 1pcs LED Controller and 2pcs sensor